Sunday, November 18, 2012

THIS PROJECT IS NOT FOR MOST PEOPLE!!!

OK, I have made my disclaimer....most people will not want to make this....but maybe you've always wanted to make a giant Santa hat, or paint a propane tank!  Maybe it will just give you some ideas regarding thinking outside the box!! 
Keeping in mind that I grow pumpkins and I have a seasonal business running a pumpkin patch, this is the what I made for our local city's Christmas Lighting Display.
I hope at the very least it made you smile!  When my friend Judy was here and my husband asked us to do this project....we really wrestled with how to do it.  Sam primed the tank with an oil based primer, then painted it 2 coats of orange with an oil based paint, and a little dark green on the top.

 Judy pretty much made the whole hat, which was the big thing. We bought some red vinylish, pleatherish fabric at JoAnns. Just figuring out the shape was a challenge for us.  Using the pencil-on-a-string method, we started at one corner and made a rounded bottom for the cone shape, which is actually a 1/4 circle.
 Next, we attached some white flannel for the trim by cutting a piece twice the width and the correct length and folded the width in half to form a pocket, then sewed it on to the bottom of our 1/4 circle.
Fold it in half, right sides together and sew from the top of the hat all the way down to where the trim starts.  You'll want to leave that trim part open for now. Turn it right sides out and it should look like this.
 It needs something to fatten up the trim as well as give it some support at the base.  We used pipe insulation...two pieces actually and inserted it into the trim  opening and slid it all the way around.
 We then connected the pieces by using a smaller piece of plastic pipe.
 Once the pieces are connected, you can hand stitch the trim closed.
Time for a pumpkin fitting.....
 Not bad....but it needs some support inside to make the hat stand up more and it needs a little (or should I say big) pom pom on the end.  Let's make one!
Judy used a piece of cheap flannel lined, plastic table cloth to make the pom pom.  She cut a long strip of it, then ran a straight stitch up the center.  Next she cut fringe strips on both sides.
Then, slowly she pulled the thread to gather it much like you would do to make a ruffle.

 Tie off the end of the thread and voila...pom pom!    
Now for some some center support to make the hat stand up....enter Sam again.  He used some hardware cloth (which is actually like a sturdy screen material) to form a cone.  This stuff is really sharp, so he taped all the edges with white duct tape.
He used some wire to hold the cone form together and it worked pretty good!
  All we needed now was a face and I was a girl with a plan.  My father-in-law use to make some awesome magnetic photo holders from sheets of magnets covered in wall paper.  He gave me several sheets.  I spray painted them black.
 When it was dry, I drew on a pumpkin face and cut it out.  
I wanted to use magnets so that I could change out the face when we use it for our pumpkin patch and corn maze.  I can even make a scary face for when our haunted maze is open next year. ( Of course the Santa hat will disappear after Christmas!)
So now I have a very sturdy display, that will hold up to wind and weather to represent our seasonal business for our local towns Christmas display. 

Here is my adorable grandson Jacob standing by it in town last night!
   
 

17 comments:

  1. Welllll, no, I am not going to make one, but I am glad you did, 'cause it is the cutest thing! You are so darn creative, Danni. Sounds like your hubby has some great ideas, too. And Jacob is such a treasure!

    ReplyDelete
  2. I would have trouble trying to dress a propane tank pumpkin in a Santa hat, but you did it. Look at the last pic. Jacob could probably fit inside the huge hat and hide. You didn't put your business name on it? I see Valentines soon and then giant bunny ears. You need to put this by your drive!

    ReplyDelete
  3. Fantastically cute! Hmm, I have an old water heater...now how am I going to dress it up? Love this post, Danni!

    ReplyDelete
  4. What a cute idea.. I love it and your
    grandson seems to love it also!
    Thanks for sharing and thank you for
    your visit to my blog..
    Happy Thanksgiving to you and your
    family...
    Sandy

    ReplyDelete
  5. Cute ... but, mmm, I'll skip the tutorial on this one ! But love the post and your grandson, Jacob, is adorable :-)

    ReplyDelete
  6. Your hubby had the best idea for your city's Christmas Lighting Display. How cute is that! That's a terrific way to advertise and be notice - as if you really need that! Have a wonderful time this holiday season, Danni!

    ReplyDelete
  7. It's like something out of that Tim Burton movie, nightmare before Christmas, my kids love that movie so they would think its great, fun for a pumpkin patch!

    ReplyDelete
  8. What a wonderful display! I love that the face is magnetic so you can keep being creative with it! Donna has a great idea - changing for each season! So, what is the pumpkin's name? -Marci @ Stone Cottage Adventures

    ReplyDelete
  9. It is cute. And your grandson leaning on it...priceless! What a BIG project, Danni! I love that it's something that is shared with your community too!

    ReplyDelete
  10. Wow! That is one giant, jolly pumpkin. How stinkin' adorable. I love it. And, it's so appropriate!

    ReplyDelete
  11. that is just so brilliant Danni - such a clever idea too

    ReplyDelete
  12. What a nifty idea! I never would have thought to decorate and 'dress' a propane tank. very, very clever!

    ReplyDelete
  13. Clever folks to figure all that out! Jacob looks very proud of your display. ~ Maureen

    ReplyDelete
  14. I LOVE IT!! You are always great at thinking outside the box. Happy week, Happy Thanksgiving!!

    ReplyDelete
  15. So cute! I'm your newest follower!
    Hugs,
    Dru

    ReplyDelete
  16. Where do you come up with these ideas?
    THis is brilliant Danni!!!

    ReplyDelete